Introduction

A. Product introduction
This product is used for special industries and submerged motor. For oxygen-free copper wire, conductor coated with semiconductor (grade cable polyethylene), crosslinked polyethylene (described.properties), nylon (PC), poly (ethylene propylene (PPE Ⅱ), Germany imports of polyvinyl chloride (PVC), high-pressure polyethylene material (high toughness, including non pollution antioxidant). The irradiation crosslinking of using different ways to meet the requirements of different degree of temperature. Apply to special the applicable requirements of the machine. Pressure level range 500 v, 500 v, heat-resistant level 100 ℃ -- 150 ℃, the section from 0.8 to 33.56, special can customize. Different temperature of the water again, test the resistance value. Ensure that the 3000 v/min not breakdown.
2. Perform standard
1/1.00-1/1.00 with single layer insulation to polyvinyl chloride (PVC) German imports as the main insulation. With German standard of NSW. 1/1.90-19/1.5 with double insulation sheath to polyethylene (PE) and nylon (PC) as the insulation material. The national GB/T4014-85 polyethylene insulation nylon sheath winding line, GB/T3953-83 "electrician with copper wire, GB/T 4901, 1-85" test method for bare copper wire, GB/T 4014-85 "polyethylene insulation nylon sheath winding line" countries such as the NSW
3. Product specifications
Specifications (bare copper wire) insulating sheath PA PE mould finished goods inspection
Outside diameter eccentricity core eccentricity mouth diameter tube forming core tube forming minimum maximum
0.03 + 0.03 Φ 1/2.60 or less Φ Φ Φ 3.75 2.85 0.03 0.03 0.015 or less Φ Φ Φ Φ 3.95 3.95 5.55 4.05
0.03 + 0.03 Φ 1/2.70 or less Φ Φ Φ 3.85 3.00 0.03 0.03 0.015 or less Φ Φ Φ Φ 4.00 4.00 5.65 4.15
0.03 + 0.03 Φ 1/2.80 or less Φ Φ Φ 4.00 3.10 0.03 0.03 0.015 or less Φ Φ Φ Φ 4.15 4.15 6.70 4.20
0.03 + 0.03 Φ 1/2.85 or less Φ Φ Φ 4.05 3.20 0.03 0.03 0.015 or less Φ Φ Φ Φ 4.20 4.20 5.85 4.35
0.03 + 0.03 Φ 1/2.90 or less Φ Φ Φ 4.10 3.25 0.03 0.03 0.015 or less Φ Φ Φ Φ 4.25 4.25 5.90 4.40
0.03 + 0.03 Φ 1/3.00 or less Φ Φ Φ 4.25 3.35 0.05 0.05 0.015 or less Φ Φ Φ Φ 4.40 4.40 6.10 4.60
0.03 + 0.03 Φ 1/3.10 or less Φ Φ Φ 4.35 3.45 0.05 0.05 0.015 or less Φ Φ Φ Φ 4.50 4.50 6.20 4.70
0.03 + 0.03 Φ 1/3.20 or less Φ Φ Φ 4.50 3.55 0.05 0.05 0.015 or less Φ Φ Φ Φ 4.65 4.65 6.35 4.85
0.03 + 0.03 Φ 1/3.35 or less Φ Φ Φ 4.65 3.70 0.05 0.05 0.015 or less Φ Φ Φ Φ 4.80 4.80 6.50 5.00
0.03 + 0.03 Φ 1/3.55 or less Φ Φ Φ 4.85 3.90 0.05 0.05 0.015 or less Φ Φ Φ Φ 5.00 5.00 6.70 5.20
0.03 + 0.03 Φ 1/3.80 or less Φ Φ Φ 5.10 4.15 0.05 0.05 0.015 or less Φ Φ Φ Φ 5.30 5.30 7.00 5.45
7/0.80 Φ acuities were Φ Φ Φ 3.55 3.55 2.75 0.05 3.45 0.015 Φ Φ Φ Φ 3.70 5.25 3.85 3.85 or less
7/0.90 Φ acuities were Φ Φ Φ 3.85 3.85 3.05 0.05 3.75 0.015 Φ Φ Φ Φ 4.00 5.65 4.15 4.15 or less
7/1.00 Φ acuities were Φ Φ Φ 4.25 4.25 3.30 0.05 4.15 0.015 Φ Φ Φ Φ 4.40 6.05 4.55 4.55 or less
7/1.04 Φ acuities were Φ Φ Φ 4.40 4.40 3.50 0.05 4.30 0.015 Φ Φ Φ Φ 4.55 6.20 4.70 4.70 or less
7/1.06 Φ acuities were Φ Φ Φ 4.50 4.50 3.55 0.05 4.40 0.015 Φ Φ Φ Φ 4.60 6.30 4.80 4.80 or less
7/1.12 Φ acuities were Φ Φ Φ 4.60 4.60 3.70 0.05 4.50 0.015 Φ Φ Φ Φ 4.75 6.40 4.90 4.90 or less
19/0.69 Φ acuities were Φ Φ Φ 4.80 4.80 3.80 0.05 4.70 0.015 Φ Φ Φ Φ 4.95 6.60 5.10 5.10 or less
19/0.72 Φ acuities were Φ Φ Φ 4.95 4.95 3.95 0.05 4.85 0.015 Φ Φ Φ Φ 5.10 6.75 5.25 5.25 or less
19/0.75 Φ acuities were Φ Φ Φ 5.10 5.10 4.10 0.05 5.00 0.015 Φ Φ Φ Φ 5.25 6.90 5.40 5.40 or less
19/0.80 Φ acuities were Φ Φ Φ 5.35 5.35 4.35 0.05 5.25 0.015 Φ Φ Φ Φ 5.50 7.15 5.65 5.65 or less
19/0.86 Φ acuities were Φ Φ Φ 5.65 5.65 4.65 0.05 5.55 0.015 Φ Φ Φ Φ 5.80 7.40 6.00 6.00 or less
19/0.90 Φ acuities were Φ Φ Φ 5.85 5.85 4.85 0.05 5.75 0.015 Φ Φ Φ Φ 6.00 7.60 6.15 6.15 or less
19/0.95 Φ acuities were Φ Φ Φ 6.10 6.10 5.10 0.05 6.00 0.015 Φ Φ Φ Φ 6.25 7.85 6.40 6.40 or less
19/1.00 Φ acuities were Φ Φ Φ 6.45 6.45 5.35 0.05 6.35 0.015 Φ Φ Φ Φ 6.60 8.15 6.75 6.75 or less
19/1.12 Φ acuities were Φ Φ Φ 7.15 7.15 5.95 0.05 7.05 0.015 Φ Φ Φ Φ 7.30 8.80 7.45 7.45 or less
19/1.20 Φ acuities were Φ Φ Φ 7.30 7.30 6.35 0.05 7.20 0.015 Φ Φ Φ Φ 7.55 8.90 7.60 7.60 or less
Specifications (bare copper wire) process size (PEE) mold size finished product inspection
Outside diameter eccentricity core tube forming most small and big mouth
0.02 + 0.02 Ф 1/1.00 or less Ф Ф Ф Ф 1.76 1.76 1.90 1.15 0.02
0.02 + 0.02 Ф 1/1.06 or less Ф Ф Ф Ф 1.80 1.80 1.95 1.20 0.02
0.02 + 0.02 Ф 1/1.08 or less Ф Ф Ф Ф 1.85 1.85 2.00 1.25 0.02
0.02 + 0.02 Ф 1/1.12 or less Ф Ф Ф Ф 1.90 1.90 2.05 1.30 0.02
0.02 + 0.02 Ф 1/1.18 or less Ф Ф Ф Ф 1.95 1.95 2.10 1.35 0.02
0.02 + 0.02 Ф 1/1.25 or less Ф Ф Ф Ф 2.00 2.00 2.15 1.40 0.02
0.02 + 0.02 Ф 1/1.30 or less Ф Ф Ф Ф 2.10 2.10 2.20 1.45 0.02
0.02 + 0.02 Ф 1/1.35 or less Ф Ф Ф Ф 2.20 2.20 2.30 1.50 0.02
0.02 + 0.02 Ф 1/1.40 or less Ф Ф Ф Ф 2.25 2.25 2.35 1.60 0.02
0.02 + 0.02 Ф 1/1.50 or less Ф Ф Ф Ф 2.30 2.30 2.40 1.70 0.02
0.02 + 0.02 Ф 1/1.56 or less Ф Ф Ф Ф 2.35 2.35 2.50 1.80 0.02
0.02 + 0.02 Ф 1/1.60 or less Ф Ф Ф Ф 2.40 2.40 2.55 1.80 0.02
0.02 + 0.02 Ф 1/1.70 or less Ф Ф Ф Ф 2.60 2.60 2.70 1.90 0.02
0.02 + 0.02 Ф 1/1.80 or less Ф Ф Ф Ф 2.70 2.70 2.80 2.00 0.03
0.02 + 0.02 Ф 1/1.90 or less Ф Ф Ф Ф 2.80 2.80 2.90 2.10 0.03
0.03 + 0.03 Ф 1/2.00 or less Ф Ф Ф Ф 3.00 3.00 3.10 2.20 0.03
0.03 + 0.03 Ф 1/2.10 or less Ф Ф Ф Ф 3.10 3.10 3.20 2.30 0.03
0.03 + 0.03 Ф 1/2.12 or less Ф Ф Ф Ф 3.10 3.10 3.20 2.30 0.03
0.03 + 0.03 Ф 1/2.24 or less Ф Ф Ф Ф 3.20 3.20 3.30 2.45 0.03
0.03 + 0.03 Ф 1/2.36 or less Ф Ф Ф Ф 3.50 3.50 3.60 2.55 0.04
0.03 + 0.03 Ф 1/2.50 or less Ф Ф Ф Ф 3.75 3.75 3.85 2.70 0.04